Wide-band Active Tunable Phase Shifter Using Improved Non-Foster circuit - ENSTA Bretagne - École nationale supérieure de techniques avancées Bretagne Accéder directement au contenu
Communication Dans Un Congrès Année : 2018

Wide-band Active Tunable Phase Shifter Using Improved Non-Foster circuit

Résumé

In this paper, an active phase shifter that features a frequency independent transmission phase response over a wideband frequency ranging from 2 GHz to 4 GHz is designed based on Non-Foster elements. The main objective of this study is to get a phase in transmission slightly tunable around 180° while having low insertion loss and minimum return loss in the considered band. The active phase shifter (PS) topology requires negative capacitances that are obtained by using Negative Impedance Converter (NIC) circuits, which convert load impedance into a negative impedance. However, it is shown that the actual realization of NIC from cross-coupled pair (XCP) with FETs leads to undesired parasitic resistance that has a significant effect on the performance of the phase shifter. Therefore, the negative capacitance used in the PS are built up by cascading two different topologies of XCP circuit that compensates the residual resistance of each other. Moreover, one of the XCP topology is also internally modified to decrease furthermore this resistive part at the implementation level.
Fichier non déposé

Dates et versions

hal-02052738 , version 1 (28-02-2019)

Identifiants

Citer

Saadou Ali Al Mokdad, Raafat Lababidi, Marc Le Roy, Sawsan Sadek, André Pérennec, et al.. Wide-band Active Tunable Phase Shifter Using Improved Non-Foster circuit. 2018 25th IEEE International Conference on Electronics, Circuits and Systems (ICECS), Dec 2018, Bordeaux, France. pp.449-452, ⟨10.1109/ICECS.2018.8618011⟩. ⟨hal-02052738⟩
47 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More