%0 Journal Article %T Strength prediction of bonded assemblies using a coupled criterion under elastic assumptions: effect of material and geometrical parameters %+ ONERA - The French Aerospace Lab [Châtillon] %+ Laboratoire brestois de mécanique et des systèmes (LBMS) %+ Institut Jean Le Rond d'Alembert (DALEMBERT) %+ Laboratoire des Composites Thermostructuraux (LCTS) %+ Mécanique des Structures Navales (MSN) %A Moradi, Azalia %A Carrère, Nicolas %A Leguillon, Dominique %A Martin, Eric %A Cognard, Jean-Yves %< avec comité de lecture %@ 0143-7496 %J International Journal of Adhesion and Adhesives %I Elsevier %N 47 %P 73-82 %8 2013 %D 2013 %R 10.1016/j.ijadhadh.2013.09.044 %K Failure prediction %K Stress analysis %K Finite fracture mechanics %K Geometrical effects %Z Engineering Sciences [physics]Journal articles %X The prediction of the failure load of bonded joints is a major issue in order to increase the confidence in the design of such assemblies. The aim of this paper is to present a method to predict the strength of adhesive joints. The failure could be initiated if two criteria are fulfilled: (i) an energy criterion and (ii) a stress criterion. The computation of these two criteria is based on elastic calculations using a 2D finite element modelling and could thus be used in an industrial design office. The effects of different parameters are studied: material parameters (elastic properties of the adhesive, strength and toughness of the adhesive) and geometrical parameters (thickness of the adhesive, presence of a fillet, overlap length). Predictions are in good agreement with experimental results evidenced in literature. %G English %L hal-01563061 %U https://hal.sorbonne-universite.fr/hal-01563061 %~ CEA %~ UNIV-BREST %~ ENSTA-BRETAGNE %~ UPMC %~ ONERA %~ CNRS %~ ENSTA-BRETAGNE-LBMS %~ IJLRDA %~ ENIB %~ DAM %~ INC-CNRS %~ IJLRDA-MISES %~ UPMC_POLE_1 %~ SORBONNE-UNIVERSITE %~ SU-SCIENCES %~ ALLIANCE-SU