A four-point bending test to study both failure initiation and crack propagation at the interface of an adhesive joint
Pierre Bidaud
,
Nicolas Carrere
,
Thomas Bonnemains
,
Eric Lolive
20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022 , Jun 2022, Lausanne (CH), Switzerland. pp.662-665
Conference papers
hal-04060359v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Ship Towed by Kite: Investigation of the Dynamic Coupling
Nedeleg Bigi
,
Kostia Roncin
,
Jean-Baptiste Leroux
,
Yves Parlier
Journal articles
hal-02924110v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Maneuvering modelling of ship towed by kite in a seaway
Nedeleg Bigi
,
V. Podeur
,
Kostia Roncin
,
Jean-Baptiste Leroux
,
Alain Nême
,
et al.
4th Innov’Sail conference, 2017 , Jun 2017, Lorient, France
Conference papers
hal-01710670v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Random versus periodic microstructures for elasticity of fibers reinforced composites
L. Bouaoune
,
Yves Brunet
,
Ahmed El Moumen
,
Toufik Kanit
,
H. Mazouzi
Journal articles
hal-01358967v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Study of the evolution of stresses and associated mechanisms in zirconia growing at high temperature on Zircaloy-4 by use of synchrotron radiation
Adam Bouayoune
,
R. Guillou
,
Béchade Jean-Luc
,
E. Rouesne
,
Jean-Luc Grosseau-Poussard
,
et al.
Journal articles
hal-04161374v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Structural design of offshore wind turbine blade spars
Hicham Boudounit
,
Mostapha Tarfaoui
,
Dennoun Saifaoui
,
Salwa El Garouge
Journal articles
hal-03327362v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Modélisation et simulation du comportement mécanique d'une pale composite d'une éolienne flottante
Hicham Boudounit
,
Mostapha Tarfaoui
,
Dennoun Saifaoui
3ème Congrès national en sciences physiques, technique et applications - SPTA , 2017, Agadir, Maroc
Conference papers
hal-01730075v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Modeling and simulation of the mechanical behavior of a composite blade of a floating wind turbine
Hicham Boudounit
,
Mostapha Tarfaoui
,
Dennoun Saifaoui
International conference on advanced materials for photonics, sensing and energy applications - AMPSECA' 2017 , Moroccan Society of Advanced Materials Physics and their Applications (SMPM2A), Mar 2017, Agadir, Morocco
Conference papers
hal-01730079v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Structural analysis of offshore wind turbine blades using finite element method
Hicham Boudounit
,
Mostapha Tarfaoui
,
Dennoun Saifaoui
,
Mourad Nachtane
Journal articles
hal-02552067v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Shock Propagation Effects in Multilayer Assembly Including a Liquid Phase
Judith Bourguille
,
Luca Bergamasco
,
Gilles Tahan
,
Daniel Fuster
,
M. Arrigoni
Journal articles
hal-01708556v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Experimental evidence of shock wave measurements with low-velocity (<100 m s −1 ) and fast dynamics (<10 ns) capabilities using a coupled photonic Doppler velocimetry (PDV) and triature velocity interferometer system for any reflector (VISAR) diagnostic
G. Boutoux
,
J.-M. Chevalier
,
M. Arrigoni
,
L. Berthe
,
R. Beuton
,
et al.
Journal articles
hal-04060432v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Analysis of planar and spherical shock-wave mitigation by wet aqueous foams
Carole Breda
,
Steven Kerampran
,
M.-O. Sturtzer
,
M. Arrigoni
,
J.F. Legendre
Kontis, Konstantinos.
Shock Wave Interactions. Selected Articles from the 22nd International Shock Interaction Symposium, University of Glasgow, United Kingdom, 4-8 July 2016 ,
Springer , pp.279-297, 2018, 978-3-319-73179-7. - 978-3-319-73180-3 (Online)
⟨10.1007/978-3-319-73180-3_22⟩
Book sections
hal-01811273v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Theorical and experimental investigation on the water exit problem
Thibaut Breton
,
Nicolas Jacques
,
Alan Tassin
6th European Conference on Computational Mechanics / 7th European Conference on Computational Fluid Dynamics (ECCM-ECFD 2018) , Jun 2018, Glasgow, United Kingdom
Conference papers
hal-01864849v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Experimental investigation of the water entry and/or exit of axisymmetric bodies
Thibaut Breton
,
Alan Tassin
,
Nicolas Jacques
Journal articles
hal-02956390v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Vieillissement thermo-oxydatif d’un élastomère industriel à application automobile antivibratoire : caractérisations et compréhension
Morgane Broudin
,
V. Le Saux
,
Yann Marco
,
Pierre-Yves Le Gac
,
W. Hervouet
,
et al.
27e édition DEformation des POlymères Solides (DEPOS27) , IFP Energies nouvelles, Mar 2017, Dourdan, France
Conference papers
hal-01713939v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Investigation of thermo-oxidative ageing effects on the fatigue design of automotive anti-vibration parts
Morgane Broudin
,
Yann Marco
,
V. Le Saux
,
Pierre Charrier
,
Wilfried Hervouet
,
et al.
Journal articles
hal-01811126v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Thermo-oxidative ageing of an industrial elastomer for anti-vibration automotive applications: characterizations, understanding, design tools
Morgane Broudin
,
V. Le Saux
,
Pierre-Yves Le Gac
,
Pierre Charrier
,
Wilfried Hervouet
,
et al.
10th European Conference on Constitutive Models for Rubbers, ECCMR X, 2017 , Aug 2017, Munich, Germany
Conference papers
hal-01713931v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Analytical and numerical study of the lateral buckling of an imperfect pipe accounting for torsional effects
Jie Cai
,
Philippe Le Grognec
,
Alain Nême
Journal articles
hal-03974664v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Characterisation of the high strain rate behaviour of tubular materials
Camille Caisso
,
Nicolas Jacques
,
Aboulghit El Malki Alaoui
,
Harold Fresnel
,
Younes Demmouche
DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading , Sep 2018, Arcachon, France.
⟨10.1051/epjconf/201818302046⟩
Conference papers
hal-01888755v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Etude et modélisation des propriétés à la fatigue à grand nombre de cycles des matériaux et des structures à partir de mesures thermométriques : bilan & perspectives
Sylvain Calloch
Journée Médaille d'Argent François Hild , Laboratoire de mécanique et technologie, LMT UMR CNRS 8535, Jul 2017, Cachan, France
Conference papers
hal-01713357v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Modelling of the damage development in carbon/epoxy laminates subjected to combined seawater ageing and mechanical loading
Nicolas Carrere
,
Nicolas Tual
,
Thomas Bonnemains
,
Éric Lolive
,
Peter Davies
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications , 2018, 232 (9), pp.761 - 768.
⟨10.1177/1464420716648353⟩
Journal articles
hal-01867650v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Experimental Characterization of Internal Structure and Physical Properties of Unidirectional Ply‐Level Hybrid Carbon Composite Material
Maria Casapu
,
Ion Fuiorea
,
M. Arrigoni
Journal articles
hal-04023792v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Proposal of a test loading a four point bending specimen thanks to an experimental Arcan device
Christophe Cellard
,
Orwa Omran
,
Laurent Sohier
,
Romain Créac'Hcadec
4th International conference on structural adhesive bonding - AB 2017 , Jul 2017, Porto, Portugal
Conference papers
hal-01730108v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Fatigue of polyamide mooring ropes for floating wind turbines
Yoan Chevillotte
,
Yann Marco
,
Peter Davies
,
Guilhem Bles
,
Maël Arhant
Journal articles
hal-01811174v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Dynamic properties and toughening mechanisms of GNPs reinforced carbon fibers/epoxy textile composites under an SHPB impact load
Manel Chihi
,
Mostapha Tarfaoui
,
Yumna Qureshi
,
Hamza Benyahia
,
Chokri Bouraoui
2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME) , Nov 2022, Maldives, Malaysia. pp.1-6,
⟨10.1109/ICECCME55909.2022.9988719⟩
Conference papers
hal-03971147v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Graphene nanofillers as a player to improve the dynamic compressive response and failure behavior of carbon/epoxy composite
Manel Chihi
,
Mostapha Tarfaoui
,
Yumna Qureshi
,
Hamza Benyahia
,
Chokri Bouraoui
Journal articles
hal-02890993v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Short and long term creep behaviour of polyamide ropes for mooring applications
Laure Civier
,
Yoan Chevillotte
,
Guilhem Bles
,
Frédéric Montel
,
Peter Davies
,
et al.
Journal articles
hal-04203847v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Numerical simulation of friction stir welding of pure copper plates
M.A. Constantin
,
E.L. Niţu
,
Claudiu Badulescu
Conference papers
hal-02433753v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Refined crack propagation methodology and energy balance analysis in the Rubber Cord Adhesion Inflation Test
P.-Y. Corbel
,
J. Jumel
,
K. Kane
,
A. Mbiakop-Ngassa
Journal articles
hal-03808877v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Calcul et dimensionnement des assemblages collés
Romain Créac'Hcadec
19e Journées d’étude sur l’adhésion - JADH 2017 , Section française de l'adhésion (SFA) - Division de la Société française du vide (SFV), Oct 2017, Sainte-Maxime (Var), France
Conference papers
hal-01727790v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Analyses et modélisations du comportement non-linéaire d’assemblages collés
Romain Créac'Hcadec
Journées Mécamat polymères - Adhésion et rupture des polymères , Association Mécamat, May 2017, Paris, France
Conference papers
hal-01727820v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Techniques for post-fracture analysis
Romain Créac'Hcadec
Da Silva, Lucas Filipe Martins; Öchsner, Andreas; Adams, Robert D.
Handbook of adhesion technology. - 2nd edition ,
Springer , pp.1-38, 2017, 978-3-319-42087-5
Book sections
hal-01730233v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
FDM technology and the effect of printing parameters on the tensile strength of ABS parts
Mohamed Daly
,
Mostapha Tarfaoui
,
Manel Chihi
,
Chokri Bouraoui
Journal articles
hal-04114159v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Plywood Experimental Investigation and Modeling Approach for Static and Dynamic Structural Applications
Samara Jadi Cruz de Oliveira
,
Ophelia Bolmin
,
M. Arrigoni
,
Christian Jochum
Andreas Öchsner, Holm Altenbach.
Improved Performance of Materials : Design and Experimental Approaches , 72,
Springer , pp.119-141, 2018, Advanced Structured Materials book series, 978-3-319-59589-4.
⟨10.1007/978-3-319-59590-0_11⟩
Book sections
hal-01707903v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Fatigue life study of laminated composites carbon-epoxy manufactured from unidirectional plies and 2D-woven plies combining thermo-mechanical analysis and a residual strength model
K. Demilly
,
Yann Marco
,
V. Le Saux
,
G. Dolo
,
Nicolas Carrere
,
et al.
20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022 , Jun 2022, Lausanne (CH), Switzerland. pp.765-768
Conference papers
hal-04045295v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
A Novel Composite Modeling Method to Analyze the Woven Fabric Structures of Leading-Edge Inflatable Kites
K. Desenclos
,
Alain Nême
,
Jean-Baptiste Leroux
,
Christian Jochum
Journal articles
hal-03971394v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Methodology to characterize damage mechanisms in adhesive bonding joints under bi-axial loadings
Jaime Destouesse
,
Claudiu Badulescu
,
Malick Diakhaté
,
David Thevenet
,
Matthieu Stackler
,
et al.
4th International conference on structural adhesive bonding - AB 2017 , Jul 2017, Porto, Portugal
Conference papers
hal-01730114v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Effect of mechanical (monotonic and cyclic) stress on the corrosion resistance of chromium-plated steel rods
Matthieu Dhondt
,
Varvara Shubina Helbert
,
Rémi Homette
,
Shabnam Arbab-Chirani
,
Sylvain Calloch
7th International Conference on Fatigue Design, Fatigue Design 2017 , Cetim, Nov 2017, Senlis, France
Conference papers
hal-01714009v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Effect of mechanical (monotonic and cyclic) stress on the corrosion resistance of chromium-plated steel rods
Matthieu Dhondt
,
Varvara Shubina
,
Rémi Homette
,
Shabnam Arbab-Chirani
,
Sylvain Calloch
Journal articles
hal-01784392v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Creep investigations on steel fasteners adhesively bonded to steel plates
Ethel Djeumen
,
Quentin Sourisseau
,
Sylvain Chataigner
,
Romain Créac'Hcadec
,
Marie-Odette Quemere
,
et al.
24è Congrès Français de Mécanique, CFM 2019 , Aug 2019, BREST, France. 15p
Conference papers
hal-02289669v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Closed-form solutions for the elastic–plastic buckling design of shell structures under external pressure
Van-Dong Do
,
Philippe Le Grognec
,
Philippe Rohart
Journal articles
hal-03970484v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Numerical and experimental modeling of offshore wind energy capture: Application to reduced scale model testing
Gonzalo Doisenbant
,
Marc Le Boulluec
,
Yves-Marie Scolan
,
Marc Guyot
Journal articles
hal-01783542v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Investigation of the influence of the temperature on the fracture properties of adhesive joints using the Arcan device
Vincent Dumont
,
Georgios Stamoulis
,
C. Badulescu
,
A. Lefèvre
,
David Thévenet
Journal articles
hal-03691840v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Kite as a Beam Modelling Approach: Assessment by Finite Element Analysis
Chloé Duport
,
A. Maison
,
Alain Nême
,
Jean-Baptiste Leroux
,
Kostia Roncin
,
et al.
7th International Airborne Wind Energy Conference (AWEC) , Oct 2017, Fribourg, Germany
Conference papers
hal-01710710v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Local results verification of a 3D non-linear lifting line method for Fluid-Structure interaction simulation on a towing kite for vessels
Chloé Duport
,
M. Deberque
,
Jean-Baptiste Leroux
,
Kostia Roncin
,
Christian Jochum
11th Symposium on High-Performance Marine Vehicles , Sep 2017, Zevenwacht, South Africa
Conference papers
hal-01710698v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
The improvement of the physical and mechanical properties of CNTs based composite material
Salwa El Garouge
,
Mostapha Tarfaoui
,
Hassan El Minor
,
Amine Bendarma
1st International Network of Biomaterials and Engineering Science, INBES 2020 , Apr 2020, Agadir, Morocco. pp.64-70,
⟨10.1016/j.matpr.2021.10.312⟩
Conference papers
hal-03648229v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Effect of impact velocity on the mechanical behavior of a composite plate under slamming impact
Salwa El Garouge
,
Mostapha Tarfaoui
,
Omar Hashim Hassoon
,
Hassan El Minor
,
Amine Bendarma
Journal articles
hal-03687293v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Effet de l’aération lors d’impacts hydrodynamiques : essais et simulations
Aboulghit El Malki Alaoui
,
Mehdi Elhimer
,
Nicolas Jacques
15èmes Journées de l’Hydrodynamique , Nov 2016, Brest, France
Conference papers
hal-01864874v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Mechanical characterization of carbon nanotubes based polymer composites using indentation tests
Ahmed El Moumen
,
Mostapha Tarfaoui
,
Khalid Lafdi
Journal articles
hal-01699538v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More
Modelling of the temperature and residual stress fields during 3D printing of polymer composites
Ahmed El Moumen
,
Mostapha Tarfaoui
,
Khalid Lafdi
Journal articles
hal-02353339v1
Actions
Share
Gmail
Facebook
Twitter
LinkedIn
More