Search - Département Mécanique Access content directly

Filter your results

302 Results
Deposit type : Notice

Numerical Study of an Arcan Tensile Compression Shear Test in Dynamic: Application to Bonded Joints

Benjamin Vales , Steven Marguet , Romain Créac'Hcadec , Laurent Sohier , Jean-François Ferrero , et al.
Complas XIII, the 13th International Conference on Computational Plasticity, Sep 2015, Barcelone, Spain
Conference papers hal-01878169v1

Effect of stacking sequence of the bonded composite patch on repair performance

Hadja Imane Beloufa , Djamel Ouinas , Mostapha Tarfaoui , Noureddine Benderdouche
Structural Engineering and Mechanics, 2016, 57 (2), pp.295-313. ⟨10.12989/sem.2016.57.2.295⟩
Journal articles hal-01282730v1

Flow-induced vibrations of in-line cylinder arrangements at low Reynolds numbers

Kintak Raymond Yu , Stéphane Étienne , Yves-Marie Scolan , Alexander Hay , Emmanuel Fontaine , et al.
Journal of Fluids and Structures, 2016, 60, pp.37-61. ⟨10.1016/j.jfluidstructs.2015.10.005⟩
Journal articles hal-01326154v1

Mechanical behavior and damage kinetics of woven E-glass/vinylester laminate composites under high strain rate dynamic compressive loading: Experimental and numerical investigation

Jamal Arbaoui , Mostapha Tarfaoui , Aboulghit El Malki Alaoui
International Journal of Impact Engineering, 2016, 87, pp.44-54. ⟨10.1016/j.ijimpeng.2015.06.026⟩
Journal articles hal-01282827v1

Prediction of thermal effects magnitude for HRAM event in fuel-filled tank using the Rayleigh-Plesset Equation.

T. Fourest , M. Arrigoni , E. Deletombe , J. Dupas , Jean-Marc Laurens
International Journal of Computational Methods and Experimental Measurements, 2016, 4 (3), p. 301-310. ⟨10.2495/CMEM-V4-N3-301-310⟩
Journal articles hal-01405816v1

A continuous and analytical modeling for kites as auxiliary propulsion devoted to merchant ships, including fuel saving estimation

Richard Leloup , Kostia Roncin , Morgan Berhel , Guilhem Bles , Jean-Baptiste Leroux , et al.
Renewable Energy, 2016, 86, pp.483-496. ⟨10.1016/j.renene.2015.08.036⟩
Journal articles hal-01282824v1

Design of bare and ducted axial marine current turbines

Jean-Marc Laurens , Mahrez Ait-Mohammed , Mostapha Tarfaoui
Renewable Energy, 2016, 89 (181-187), ⟨10.1016/j.renene.2015.11.075⟩
Journal articles hal-01365834v1

Effect of adhesive thickness on the Mode I and II strain energy release rates. Comparative study between different approaches for the calculation of Mode I & II SERR's

Owaisur Rahman Shah , Mostapha Tarfaoui
Composites Part B: Engineering, 2016, 96, pp.354 - 363. ⟨10.1016/j.compositesb.2016.04.042⟩
Journal articles hal-01710220v1

Comparative study of mechanical properties and damage kinetics of two- and three-dimensional woven composites under high-strain rate dynamic compressive loading

Jamal Arbaoui , Mostapha Tarfaoui , Charbel Bouery , Aboulghit El Malki Alaoui
International Journal of Damage Mechanics, 2016, 25 (6), pp.878-899. ⟨10.1177/1056789516651691⟩
Journal articles hal-01485662v1

Finite element model for the assessment of the mesh resistance to opening of fishing nets

Barthélémy Morvan , Daniel Priour , Zakoua Guédé , G. Bles
Ocean Engineering, 2016, 123, pp.303-313. ⟨10.1016/j.oceaneng.2016.07.026⟩
Journal articles hal-01365387v1

Numerical & Experimental Study of a Modified Arcan Device in Dynamic: Application to Bonded Joints

Benjamin Vales , Steven Marguet , Romain Créac'Hcadec , Laurent Sohier , Jean-François Ferrero , et al.
Euradh 2016, the 11th European Adhesion Conference and Adhesion '16, the 13th International Conference on the Science and Technology of Adhesion and Adhesives, Sep 2016, Glasgow, United Kingdom
Conference papers hal-01878163v1

Dynamical characterisation and damage mechanisms of E-glass/vinylester woven composites at high strain rates compression

Jamal Arbaoui , Mostapha Tarfaoui , Aboulghit El Malki Alaoui
Journal of Composite Materials, 2016, 50 (24), pp.3313-3323. ⟨10.1177/0021998315619223⟩
Journal articles hal-01485664v1

Random versus periodic microstructures for elasticity of fibers reinforced composites

L. Bouaoune , Yves Brunet , Ahmed El Moumen , Toufik Kanit , H. Mazouzi
Composites Part B: Engineering, 2016, 103, pp.68-73. ⟨10.1016/j.compositesb.2016.08.026⟩
Journal articles hal-01358967v1

Modelling of micro-inertia effects in closed-cell foams with application to acoustic and shock wave propagation

Romain Barthélémy , Nicolas Jacques , Steven Kerampran , Fabrice Vermeersch
International Journal of Solids and Structures, 2016, 97-98, pp.445-457. ⟨10.1016/j.ijsolstr.2016.07.005⟩
Journal articles hal-01365428v1

On the dynamic behavior of porous ductile solids containing spheroidal voids

Cédric Sartori , Sébastien Mercier , Nicolas Jacques , Alain Molinari
International Journal of Solids and Structures, 2016, 97-98, pp.150-167. ⟨10.1016/j.ijsolstr.2016.07.033⟩
Journal articles hal-01365474v1

Mechanical properties of carbon nanotubes based polymer composites

Mostapha Tarfaoui , Khalid Lafdi , Ahmed El Moumen
Composites Part B: Engineering, 2016, 103, pp.113-121. ⟨10.1016/j.compositesb.2016.08.016⟩
Journal articles hal-01365873v1

Effective transverse elastic properties of unidirectional fiber reinforced composites

Dalila Beicha , Toufik Kanit , Yves Brunet , Abdellatif Imad , Ahmed El Moumen , et al.
Mechanics of Materials, 2016, 102, pp.47-53. ⟨10.1016/j.mechmat.2016.08.010⟩
Journal articles hal-01376297v1

Effet de l’aération lors d’impacts hydrodynamiques : essais et simulations

Aboulghit El Malki Alaoui , Mehdi Elhimer , Nicolas Jacques
15èmes Journées de l’Hydrodynamique, Nov 2016, Brest, France
Conference papers hal-01864874v1

Etude expérimentale et numérique du phénomène de sortie d’eau

Alan Tassin , Nicolas Jacques , Bertrand Forest , Sébastien Chalony , Jérémy Ohana , et al.
15èmes Journées de l’Hydrodynamique, Nov 2016, Brest, France
Conference papers hal-01864870v1

A coupled experimental/numerical approach for the characterization of material behavior at high strain-rate using electromagnetic tube expansion testing

Anne-Claire Jeanson , François Bay , Nicolas Jacques , Gilles Avrillaud , M. Arrigoni , et al.
International Journal of Impact Engineering, 2016, 98, pp.75-87. ⟨10.1016/j.ijimpeng.2016.07.002⟩
Journal articles hal-01365436v1

Matériaux composites pour les énergies marines renouvelables

Mourad Nachtane , Mostapha Tarfaoui , Dennoun Saifaoui
Éditions universitaires européennes, 2017, 978-620-2-26157-9
Books hal-01730251v1

Proposition of a compensated pixelwise calibration for photonic infrared cameras and comparison to classic calibration procedures: case of thermoelastic stress analysis

V. Le Saux , Cédric Doudard
Infrared Physics and Technology, 2017, 80, pp.83-92. ⟨10.1016/j.infrared.2016.11.008⟩
Journal articles hal-01457004v1

Modélisation et simulation du comportement mécanique d'une pale composite d'une éolienne flottante

Hicham Boudounit , Mostapha Tarfaoui , Dennoun Saifaoui
3ème Congrès national en sciences physiques, technique et applications - SPTA, 2017, Agadir, Maroc
Conference papers hal-01730075v1

Techniques for post-fracture analysis

Romain Créac'Hcadec
Da Silva, Lucas Filipe Martins; Öchsner, Andreas; Adams, Robert D. Handbook of adhesion technology. - 2nd edition, Springer, pp.1-38, 2017, 978-3-319-42087-5
Book sections hal-01730233v1

Experimental and numerical investigation on the dynamic response of sandwich composite panels under hydrodynamic slamming loads

Omar Hashim Hassoon , Mostapha Tarfaoui , Aboulghit El Malki Alaoui , Ahmed El Moumen
Composite Structures, 2017, 178, pp.297-307. ⟨10.1016/j.compstruct.2017.07.014⟩
Journal articles hal-01581956v1

Identification of the micro-plasticity mechanisms at the origin of self-heating under cyclic loading with low stress amplitude

Rémy Munier , Cédric Doudard , Sylvain Calloch , M. Weber
International Journal of Fatigue, 2017, 103, pp.122-135
Journal articles hal-01581049v1

Experimental Comparison of In-Depth Residual Stresses Measured with Neutron and X-Ray Diffraction with a Numerical Stress Relaxation Correction Method

Bruno Levieil , Florent Bridier , Cédric Doudard , V. Klosek , David Thevenet , et al.
Materials Science Forum, 2017, 905, pp.131-136
Journal articles hal-01581054v1

On the origin of residual strain in shape memory alloys: Experimental investigation on evolutions in the microstructure of CuAlBe during complex thermomechanical loadings

Mahmoud Barati , Shabnam Arbab-Chirani , Mahmoud Kadkhodaei , Luc Saint-Sulpice , Sylvain Calloch
Smart Materials and Structures, 2017, 26 (2)
Journal articles hal-01581030v1

Strain-space multi-surface Saint-Venant model to describe multiaxial elastic-plastic cyclic behavior

Corado Ningre , Guilhem Blès , Ali Tourabi , Didier Imbault
23rd International Conference on Plasticity, Damage and Fracture, Jan 2017, Puerto Vallarta, Mexico
Conference papers hal-01713533v1

Laser Shocks as a damage threshold and residual stress assessment for thick epoxy, effects of plasticity and thermal degradation

Christian Jochum , M. Arrigoni , P. Mostovykh
Plasticity 2017, Jan 2017, Puerto Vallarta, Mexico
Conference papers hal-01713568v1

Caractérisation rapide de l'influence du vieillissement marin sur le comportement mécanique d'un adhésif structural

Alin Ilioni , Claudiu Badulescu , Pierre-Yves Le Gac , Peter Davies , David Thevenet
Mécamat Aussois 2017 - Fatigue des structures et des matériaux, Association Mécamat, Jan 2017, Aussois (Savoie), France
Conference papers hal-01730093v1

Predicting the failure of adhesively bonded structures using a coupled stress - energetic failure criterion

Jérémy Le Pavic , Georgios Stamoulis , Thomas Bonnemains , David Thevenet
Colloque national Mécamat Aussois 2017 - Fatigue des structures et des matériaux, Jan 2017, Aussois (Savoie), France
Conference papers hal-01730094v1

Développement d'outils prédictifs de la tenue en fatigue de structures collées

David Thevenet , Pierre Bidaud , Romain Créac'Hcadec , Nicolas Carrere
Colloque Mécamat Aussois 2017 - Fatigue des structures et des matériaux, Association Mécamat, Jan 2017, Aussois, France
Conference papers hal-01727761v1

Apports des mesures de champs d'énergie dissipée pour le dimensionnement en fatigue des élastomères et composites thermoplastiques

Yann Marco
Colloque MECAMAT 2017, Jan 2017, Aussois, France
Conference papers hal-01713388v1

Fatigue performance of superelastic NiTi near stress-induced martensitic transformation

Eduardo Alarcon , Ludek Heller , Shabnam Arbab-Chirani , Petr Sittner , Jaromír Kopeček , et al.
International Journal of Fatigue, 2017, 95, pp.76-89. ⟨10.1016/j.ijfatigue.2016.10.005⟩
Journal articles hal-01581016v1

A uniaxial constitutive model for superelastic NiTi SMA including R-phase and martensite transformations and thermal effects

Guillaume Helbert , Luc Saint-Sulpice , Shabnam Arbab-Chirani , Lamine Dieng , Thibaut Lecompte , et al.
Smart Materials and Structures, 2017, 26 (2), pp.025007. ⟨10.1088/1361-665X/aa5141⟩
Journal articles hal-01581023v1

Determination of mode I & II strain energy release rates in composite foam core sandwiches. An experimental study of the composite foam core interfacial fracture resistance

Owaisur Rahman Shah , Mostapha Tarfaoui
Composites Part B: Engineering, 2017, 111, pp.134 - 142. ⟨10.1016/j.compositesb.2016.11.044⟩
Journal articles hal-01699556v1

Évaluation d'un seuil d'endommagement lié au test LASAT sur assemblages collés : comparaison entre signal vélocimétrie hétérodyne et observations post-mortem

Gilles Tahan , M. Arrigoni , Pierre Bidaud , David Thevenet
5èmes Journées vélocimétrie hétérodyne, Mar 2017, Rennes, France
Conference papers hal-01730209v1

Numerical simulation of highly nonlinear sloshing in a tank due to forced motion

Yves-Marie Scolan , Laurent Brosset
International Journal of Offshore and Polar Engineering (IJOPE), 2017, 27 (1), pp.11-17
Journal articles hal-01485635v1

Progressive damage modeling in carbon fibers/carbon nanotubes reinforced polymer composites

Mostapha Tarfaoui , Ahmed El Moumen , Khalid Lafdi
Composites Part B: Engineering, 2017, 112, pp.185 - 195. ⟨10.1016/j.compositesb.2016.12.056⟩
Journal articles hal-01699543v1

Modélisation du comportement de mousses métalliques sous choc. Journées du groupe de travail

Romain Barthélémy , Nicolas Jacques , Steven Kerampran , Fabrice Vermeersch
MécaDymat 2017, Mar 2017, Cachan, France
Conference papers hal-01713557v1

Sandwich marine structures subjected to slamming impact: experimental characterization vs numerical simulation

Omar Hashim Hassoon , Mostapha Tarfaoui , Aboulghit El Malki Alaoui , Ahmed El Moumen
Groupe de travail MÉCADYMAT, Mar 2017, Cachan, France
Conference papers hal-01713455v1

Matériaux élastomères : caractérisation thermomécanique des mécanismes de fatigue à l’échelle de l’inclusion

Yann Marco , Thomas Glanowski , V. Le Saux , Pierre Charrier , Bertrand Huneau , et al.
27e édition DEformation des POlymères Solides (DEPOS27), IFP Energies nouvelles, Mar 2017, Dourdan, France
Conference papers hal-01713944v1

Vieillissement thermo-oxydatif d’un élastomère industriel à application automobile antivibratoire : caractérisations et compréhension

Morgane Broudin , V. Le Saux , Yann Marco , Pierre-Yves Le Gac , W. Hervouet , et al.
27e édition DEformation des POlymères Solides (DEPOS27) , IFP Energies nouvelles, Mar 2017, Dourdan, France
Conference papers hal-01713939v1

Fluid-structure interaction effects of horizontal axis marine current turbines

Mourad Nachtane , Mostapha Tarfaoui , Dennoun Saifaoui
3e congrès national en sciences physiques, techniques et applications, Mar 2017, Agadir, Morocco
Conference papers hal-01728060v1

Multifunctional composites based carbon nanotubes for marine energy conversion systems

Ahmed El Moumen , Mostapha Tarfaoui , Khalid Lafdi
International conference on advanced materials for photonics, sensing and energy applications - AMPSECA' 2017, Moroccan Association of Physics of Advanced Materials and Their Applications, Mar 2017, Agadir, Morocco
Conference papers hal-01727925v1

Modeling and simulation of the mechanical behavior of a composite blade of a floating wind turbine

Hicham Boudounit , Mostapha Tarfaoui , Dennoun Saifaoui
International conference on advanced materials for photonics, sensing and energy applications - AMPSECA' 2017, Moroccan Society of Advanced Materials Physics and their Applications (SMPM2A), Mar 2017, Agadir, Morocco
Conference papers hal-01730079v1

Effect of duct geometry on the performance of horizontal-axis marine current turbines

Mourad Nachtane , Mostapha Tarfaoui , Dennoun Saifaoui
International conference on advanced materials for photonics, sensing and energy applications - AMPSECA' 2017, Mar 2017, Agadir, Morocco
Conference papers hal-01728037v1

The influence of aeration and compressibility on slamming loads during cone water entry

Mehdi Elhimer , Nicolas Jacques , Aboulghit El Malki Alaoui , Céline Gabillet
Journal of Fluids and Structures, 2017, 70, pp.24-46. ⟨10.1016/j.jfluidstructs.2016.12.012⟩
Journal articles hal-01485641v1

Mechanical characterization of carbon nanotubes based polymer composites using indentation tests

Ahmed El Moumen , Mostapha Tarfaoui , Khalid Lafdi
Composites Part B: Engineering, 2017, 114, pp.1 - 7. ⟨10.1016/j.compositesb.2017.02.005⟩
Journal articles hal-01699538v1

Effective thermal and mechanical properties of randomly oriented short and long fiber composites

Muhamad Shafiq Sukiman , Toufik Kanit , Franck N'Guyen , Abdellatif Imad , Ahmed El Moumen , et al.
Mechanics of Materials, 2017, 107, pp.56-70. ⟨10.1016/j.mechmat.2017.02.002⟩
Journal articles hal-01483533v1

Influence of the temperature on the dynamic behavior of composite structure pipes : experimental analysis

Hamza Ben Yahia , Mostapha Tarfaoui , Ahmed El Moumen
Materiais 2017 - XVIII Congresso da Sociedade Portuguesa de Materiais and VIII International symposium on materials, Sociedade Portuguesa de Materiais, Apr 2017, Aveiro, Portugal
Conference papers hal-01728003v1

Performance of polymer composites reinforced with carbon nanotubes

Mostapha Tarfaoui , Khalid Lafdi , Ahmed El Moumen
13e congrès de mécanique, Apr 2017, Meknès, Morocco
Conference papers hal-01727938v1

Resource assessment of tidal stream energy in Morocco

Mourad Nachtane , Mostapha Tarfaoui , Dennoun Saifaoui , Hilmi Karim
2e Colloque international sur les énergies renouvelables et les emplois verts, Apr 2017, Casablanca, Morocco
Conference papers hal-01730061v1

Polychloroprene behaviour in a marine environment: role of silica fillers

S.T. Tchalla , Pierre-Yves Le Gac , Raphaël Maurin , Romain Créac'Hcadec
Polymer Degradation and Stability, 2017, 139, pp.28 - 37. ⟨10.1016/j.polymdegradstab.2017.03.011⟩
Journal articles hal-01699531v1

Numerical simulation of low cycle fatigue behavior of welded joints for naval applications: influence of residual stresses

Bruno Levieil , Florent Bridier , Cédric Doudard , David Thevenet , Sylvain Calloch , et al.
Welding in the World, 2017, 61 (3), pp.551-561. ⟨10.1007/s40194-017-0453-x⟩
Journal articles hal-01581020v1

Comparison between an analytical approach and a CFD model applied to wave impacts on a parabola

Antoine Morvan , Yves-Marie Scolan , Nicolas Jacques
Conference on Computational Methods in Marine Engineering (Marine 2017), May 2017, Nantes, France
Conference papers hal-01710618v1

The effect of composite structure flexibility on slamming impact loads: experimental study

Omar Hashim Hassoon , Mostapha Tarfaoui , Aboulghit El Malki Alaoui , Ahmed El Moumen
VII International conference on computational methods in marine engineering - Marine 2017, May 2017, Nantes, France
Conference papers hal-01713469v1

Dynamic flow surface of porous materials containing spheroidal void shape

Sebastien Mercier , Cédric Sartori , Nicolas Jacques , Alain Molinari
10th ICACM US-France Symposium, Dynamic Damage and Fragmentation (ICACM 2017), May 2017, Fort Walton Beach, Florida, United States
Conference papers hal-01710626v1

Analyses et modélisations du comportement non-linéaire d’assemblages collés

Romain Créac'Hcadec
Journées Mécamat polymères - Adhésion et rupture des polymères, Association Mécamat, May 2017, Paris, France
Conference papers hal-01727820v1

Experimental investigations on the fatigue resistance of synthetic rubbers

Thomas Balutch , Bertrand Huneau , Yann Marco , Pierre Charrier , Clément Champy
Journées de Printemps SF2M, Commission Fatigue des Matériaux de la SF2M, May 2017, Paris, France
Conference papers hal-01713650v1

Thermomechanical characterization of the fatigue mechanisms of rubber materials at inclusions' scale

Yann Marco , Thomas Glanowski , V. Le Saux , Pierre Charrier , Bertrand Huneau , et al.
36 emes Journées de Printemps SF2M, Commission Fatigue des Matériaux de la SF2M,, May 2017, Paris, France
Conference papers hal-01713951v1

Prévision de la tenue en fatigue de structures collées

David Thevenet , Pierre Bidaud , Romain Créac'Hcadec , Nicolas Carrere
36èmes Journées de printemps SF2M - JP 2017, Société française de métallurgie et de matériaux - SF2M, May 2017, Paris, France
Conference papers hal-01730088v1

Damage prediction of horizontal axis marine current turbines under hydrodynamic, hydrostatic and impacts loads

Mourad Nachtane , Mostapha Tarfaoui , Ahmed El Moumen , Dennoun Saifaoui
Composite Structures, 2017, 170, pp.146 - 157. ⟨10.1016/j.compstruct.2017.03.015⟩
Journal articles hal-01699506v1

Investigating the influence of material non-linearity in the fracture properties of ductile adhesives submitted to mixed-mode loading

Georgios Stamoulis , Nicolas Carrere
Engineering Fracture Mechanics, 2017, 179, pp.260 - 271. ⟨10.1016/j.engfracmech.2017.04.017⟩
Journal articles hal-01727698v1

Effect of microscale inertia on the dynamic response of porous ductile metals in the void growth and void coalescence regimes

Alain Molinari , Cédric Sartori , Sébastien Mercier , Nicolas Jacques
14th International Conference on Fracture (ICF 14), Jun 2017, Rhodes, Greece
Conference papers hal-01710631v1

Dynamic imaging of a gravity wave caused by laser-induced breakdown in a fluid waveguide using acoustic waves

Tobias van Baarsel , Philippe Roux , Barbara Nicolas , Jerome I. Mars , Julien Bonnel , et al.
Acoustics 2017 - Forum Acusticum 2017 - 173rd Meeting of The Acoustical Society of America and the 8th Forum Acusticum, Jun 2017, Boston, MA, United States. pp.3589-3589
Conference papers hal-01961429v1

Experimental set up for measuring onshore and onboard performances of leading edge inflatable kites - Presentation of onshore results

Morgan Behrel , Kostia Roncin , Jean-Baptiste Leroux , Alain Nême , Christian Jochum , et al.
4th Innov’Sail conference 2017, Jun 2017, Lorient, France
Conference papers hal-01710666v1

Maneuvering modelling of ship towed by kite in a seaway

Nedeleg Bigi , V. Podeur , Kostia Roncin , Jean-Baptiste Leroux , Alain Nême , et al.
4th Innov’Sail conference, 2017, Jun 2017, Lorient, France
Conference papers hal-01710670v1

Dynamic properties of carbon nanotubes / carbon fibers reinforced polymer composites

Ahmed El Moumen , Mostapha Tarfaoui , Khalid Lafdi
International nanotech & nanoscience conference and exhibition - Nanotech France 2017, Setcor, Jun 2017, Paris, France
Conference papers hal-01727905v1

Fast prediction of the Wöhler curve from thermal measurements for a wide range of NR and SBR compounds

Yann Marco , Isaure Masquelier , V. Le Saux , P. Charrier
Rubber Chemistry and Technology, 2017, 90 (3), pp.487 - 507. ⟨10.5254/rct.16.83755⟩
Journal articles hal-01690516v1

Etude et modélisation des propriétés à la fatigue à grand nombre de cycles des matériaux et des structures à partir de mesures thermométriques : bilan & perspectives

Sylvain Calloch
Journée Médaille d'Argent François Hild, Laboratoire de mécanique et technologie, LMT UMR CNRS 8535, Jul 2017, Cachan, France
Conference papers hal-01713357v1

Experimental and numerical approaches of Beech Laminated Veneer Lumber modelling under dynamic loading for structural applications

M. Arrigoni , B. Hoareau , J. Kalfon , Christian Jochum
11th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2017 , Jul 2017, Vienne, Austria
Conference papers hal-01713496v1

Evaluation of the fatigue properties of polymers and composites based on thermomechanical characterization and micro-structural measurements

Yann Marco
1th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2017 , Prof. A. Öchsner, Prof. H. Altenbach, Jul 2017, Vienne, Austria
Conference papers hal-01713382v1

Modélisation du comportement des assemblages collés : une stratégie de caractérisation

Claudiu Badulescu , Alin Ilioni , David Thevenet
2ème Colloque de l'Association Supméca - Les assemblages mécaniques : évolutions récentes et perspectives, Association Supméca, Jul 2017, Saint-Ouen (Seine-Saint-Denis), France
Conference papers hal-01730203v1

3D experimental analysis of a scarf joint test by means of X-ray tomography

Claudiu Badulescu , Nicolas Carrere , Jérôme Adrien , Éric Maire
4th International conference on structural adhesive bonding - AB 2017, Jul 2017, Porto, Portugal
Conference papers hal-01730098v1